Join now - be part of our community!

ARC/ARC S Battery drain problem Solved Finally !!!!!

SOLVED
Auni
Contributor

ARC/ARC S Battery drain problem Solved Finally !!!!!

Finally my ARC S is giving execellent battery backup.

Almost double battery backup:smileylaugh:

Please find this thread below

http://forum.xda-developers.com/showthread.php?t=1413262

Please check this thread from XDA.

"

Hello guys

Today i am going to give you a very small tip may you people like it ....
i used 2.3.4_283 firmware in Arc for a long time , after that i flashed 42 firmware and feel that its drain battery fast as compare to 283 firmware either you are using you phone or it is in deep sleep mod
Then i flashed 58 firmware and after that 62 firmware but battery drains still fast
then i try one thing on my arc i get the Kernel from 283 firmware and flashed it on all three version of firmwares ( 42, 58, 62 ) and notice that the issue of fast battery drain is solved it is only because of 283 kernel "


now i am using 42 firmware with baseband 64 and kernel from 283 firmware






It does'n matter what ever the firmware you are using or what ever the baseband you are using ....... you need to use kernel from 283 firmware only for low battery drains ..............

i attached kernel from global generic wold 283 firmware also...

How to flash different Kernels

1) connect your phone into fast boot

2) open cmd

3) fastboot devices
(write this command and enter it to check your phone is connected in
fastboot or not)

4) then write this and enter

fastboot flash boot kernel.sin

Done ..........

remember to copy kernel .sin file in that folder from where you are going to launch cmd

=============================================================================================================

I have done this already and my ARC S works completely fine.

This how I have done it

-----------------------------------------------------------------------------


Requirements:

  1. LT18i_4.0.2.A.0.58(2.3.4)_HK firmware (Download from here)
  2. The Kernel from .283 (Download the KERNEL here)
  3. Flash Tool ( Download from here)
  4. WinZip/Winrar or any other similar software. 

Steps

---------------------------------------------------------------------------------------------------------------------------------------------------------

Step 1: Download the LT18i_4.0.2.A.0.58 (2.3.4) _HK firmware

  • Unzip the firmware *.ftf file using WinZip or Winrar.
  • You will get a folder like this.

1.png

Step 2: Download the Kernel file

  • Unzip the file
  • You will get a file named “Kernel.sin

2.png

Step 3: Copy the “Kernel.sin” file

  • Paste the file to the firmware (LT18i_4.0.2.A.0.58 (2.3.4) _HK) folder and replace it.

3.png

NOW OPEN FLASH TOOL FOLDER. YOU SHOULD SEE FIVE FOLDERS WITHIN IT.

4.png


Step 4: Copy the LT18i_4.0.2.A.0.58 (2.3.4) _HK folder

5.png

Step 5: Paste the folder within firmwares folder

6.png

Step 5: Click on Flash Tool .exe

  • Click on Advanced from the menu
  • Select bundle creation

8.png

Step 6: Click “select source folder” (click on the doted button)

9.png

Step 7: Select the folder that you have copied in Flash Tool/ firmwares folder (LT18i_4.0.2.A.0.58 (2.3.4)

10.png


Step 8: You will get all the file list on the left side

11.png

Step 9: Select all file and click on the “Right Arrow” button.

  • All files should be now at right side.

13.png

Step 10: Put anything in this 3 boxes (doesn’t really matter)

I have put following

  • Device:  LT18i
  • Version:  0.58_283
  • Branding: Stock SE


14.png

Step 11: Click OK and wait.

15.png

Step 12: When you will see the "Finished bundle creation"  message, then the firmware is ready.

Step 13: Check the Flash Tool/firmwares folder. You should get your new firmware “LT18i_0.58_283_Stock SE.ftf” file there.

16.png

IF you DO, then just flash your device with this firmware.

All done.

**Important**:

  • I am not responsible if anything goes wrong, so proceed carefully, do not miss any step.
  • I have tested this kernel combination with both 0.42 & 0.58 firmware and it works fine in ARC S.
  • 0.62 firmware (didn’t worked for me)
  • You can easily root this firmware using the zergRush method.

Message was edited by: Auni

50 REPLIES 50
Not applicable

i was happy ics coz superb speedy but now happy with gb too for battery backup :smileygrin:

and that process is too complicated so don wanna use that

btw is there any site or app like blackmart , from whr i can download all android apps

Auni
Contributor

Check your PM.:smileyhappy:

I've inboxed you.

Not applicable

thanks man

do u have valid link for xperia mini pro 2.3.4 firmware ? i checked in xda site but links r not valid and sony didnt relase ics for xperia mini pro ?

Not applicable

Auni, you share a good stuff:smileywink:. And thanks zohaib0001 who did this! But I dare whether it works for my SE Live With Walkman (WT19i) or Not:smileyconfused: If anybody experience that it reduces fast baterry draining issues, please post/share. We the Live With Walkman :smileylove:wner will be greatly benefited.

Auni
Contributor

No Idea about the Mini Pro device Firmware, since i do not have the device.

You can check @ mini pro section, someone might help you on this.

http://talk.sonymobile.com/community/support/xperia2011/minipro

Dogus
Visitor

Hey Uni !!

I've just found your article about arc s battery drain solved

I'm really shocked when first using Arc S, the incredible battery drain make this handset

good for nothing, espceially when browsing and take continous camera's shoot ( I like photographing)

My First Question :

I want to try your kernel, but before that, may I ask you something ?

My Arc S state now, is 62 (as you described it's only worked well with 52)

if I flashed with 58 (automatically downgrade isn't it ?) will I face problem ?

My Second Question :

My Arc S now suitted with multi telephone language (I need it, especially Japanese)

If I flashed with your kernel, will I lost the multi language ???

Thank you

I need your reply as soon as possible

God Bless You 😉

rhemfur
Visitor

Hey I have to be honest with you!!:smileymrgreen:

Before I use to have to rechard nearly every day, After I have done that now hold about 3 days!!!

I have just coming back here to say thank you so much to share it!! 

Thank you!

:smileysmileythumbsup:

johnC1
Visitor

I am also experiencing battery drain. Kindly see image attached. I seem to have the correct build there at:

ArcS data

[quote]
Android version 2.3.4
Build Number: 4.0.2.A.0.62
Kernel version
2.6.32.9-perf
SEMCUser@SEMCHost#1
[/quote]

I charge my phone everyday...:( Is there any that I can do...?

adlin
Visitor

Auni, help. I don't understand how to combine the .283 kernel and.58 firmware. Please guide me the steps...

Jak0biN
Visitor

Hello,

This is the second time I follow this guide with two different phones ( but two equals LT18i's ) and I still have the same problem with battery drains.

screenshot_2014-05-09_1638.png

As you can see, im using the same firmware that you described in your guide, also keeping the brightness below 30%, don't know what I'm doing wrong because the problem persists.

Thank you.